CECT SciPhone i9+ set up for AT&T WAP and MMS

At&t WAP Setup

***First Step***
1.Main menu –> Select Services
2.Select Data Account –> Select GPRS
3.Select the first entry
4.Edit the account name to whatever you would like
5.Edit APN to wap.cingular (lowercase)
6.Edit Username to WAP@CINGULARGPRS.COM (UPPERCASE)
7.Edit Password to CINGULAR1 (UPPERCASE)
8.Edit Auth Type. to Secure
9. Save
Select Back –> Select Back

***Second Step***
Select WAP
1.Select Settings –> Edit Profile
2.Select the first entry –> Edit Profile
3.Edit the name to whatever you would like
4.Edit Homepage to http://device.home
5.Edit Data Account to the Name you established in the First Step
6.Edit Connection type to HTTP
7.The IP address is 066.209.011.032 and the port number is 8080
8.Edit Username to WAP@CINGULARGPRS.COM
9.Edit Password to CINGULAR1
Select back or done
Select Activate Account

You should now see a Black [G] in the upper left of your screen.
To access the net select Services –> WAP –> Homepage.
If it connects the Black [G] should turn Green

MMS
Select Messages –> MMS –> Message Settings
Select Server Profile
Select the first entry
Select Edit Profile
Edit Rename Profile to whatever name you would like
Edit Home Page to http://mmsc.cingular.com
Edit Data Account to the same data account you created for WAP
Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
Edit the Username to WAP@CINGULARGPRS.COM (UPPERCASE)
Edit the Password to CINGULAR1 (UPPERCASE)
Select Done or Save
Make sure to activate the profile and you are good.

At&t WAP Setup

***First Step***
1.Main menu –> Select Services
2.Select Data Account –> Select GPRS
3.Select the first entry
4.Edit the account name to whatever you would like
5.Edit APN to wap.cingular (lowercase)
6.Edit Username to WAP@CINGULARGPRS.COM (UPPERCASE)
7.Edit Password to CINGULAR1 (UPPERCASE)
8.Edit Auth Type. to Secure
9. Save
Select Back –> Select Back

***Second Step***
Select WAP
1.Select Settings –> Edit Profile
2.Select the first entry –> Edit Profile
3.Edit the name to whatever you would like
4.Edit Homepage to http://device.home
5.Edit Data Account to the Name you established in the First Step
6.Edit Connection type to HTTP
7.The IP address is 066.209.011.032 and the port number is 8080
8.Edit Username to WAP@CINGULARGPRS.COM
9.Edit Password to CINGULAR1
Select back or done
Select Activate Account

You should now see a Black [G] in the upper left of your screen.
To access the net select Services –> WAP –> Homepage.
If it connects the Black [G] should turn Green

MMS
Select Messages –> MMS –> Message Settings
Select Server Profile
Select the first entry
Select Edit Profile
Edit Rename Profile to whatever name you would like
Edit Home Page to http://mmsc.cingular.com
Edit Data Account to the same data account you created for WAP
Edit Connection Type to HTTP the IP address is 066.209.011.032 and the port is 8080
Edit the Username to WAP@CINGULARGPRS.COM (UPPERCASE)
Edit the Password to CINGULAR1 (UPPERCASE)
Select Done or Save
Make sure to activate the profile and you are good.

Advertisements

3 Responses to CECT SciPhone i9+ set up for AT&T WAP and MMS

  1. […] This post was mentioned on Twitter by LaurieMcCulloch. LaurieMcCulloch said: WAP: CECT SciPhone i9+ set up for AT&T WAP and MMS « Observations from … http://bit.ly/b5txgv […]

  2. applezz13 says:

    Can you help with settings for Tmobile?

  3. T.M.M. says:

    You bet! Just click TMOBILE

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: